Red (and Brown) Velvet

Ironman was away for the first half of this week at a conference, and my therapy was spinning. Intensive, hours-long spinning sessions. Until very late at night. Watching really, really bad TV. Inspired by Sarah, I dug into March/April's installment of the Hello Yarn Fiber Club: Red Velvet.

Red Velvel prepped

Handdyed Shetland wool, 8 oz. My previous experience with Shetland was not terribly successful, but I'm now convinced that was operator error (aka Overspinning). This stuff is absolutely incredible. I stripped each 4 oz bundle in half and then in half again, and wound two roving balls with two strips of each half (in the same order). I didn't bother to predraft, since Sarah's rave reviews seemed to indicate it wasn't necessary. And away I went.

I've been doing a lot of fine singles recently, so I wanted to try and do a softer twist, thicker single. I recently got "Spinning for Softness and Speed" and, while not quite ready to take the entire plunge, I used some of the ideas from that book while spinning these.

Red Velvet singles

I spun all the singles from the end, using some sort of bastardization of long draw, and ended up with four bobbins of smooshy, squishy, plush singles. They also went really really fast - 2 hrs/4 oz (fast for me). Two nights worth of work and the singles were done.

I plied the first two bobbins on Wednesday night, sitting out on the back porch, smelling the jasmine and enjoying the gorgeous weather. Plus I figured out how to ply with just one hand! A key point for the plying/imbibing/relaxing trinity. Plying the first skein took just an hour, and it is gorgeous and squishy and glorious. The other two bobbins are on tap for tonight.

Red Velvet



Red Velvet



Final specs: 100% shetland wool top from Hello Yarn
Spun at 9:1, from the end, semi-worsted, semi-longdraw. Plied at 7:1 (Look Ma, one hand!) with appropriate beverage.
215 yds/4 oz, no idea of wpi, soft fuzzy yarn. I'm amazed at how closely the colors lined up - there's some baberpole, but not much. I'm envisioning a Tomten for Devil out of this stuff, in combo with some Lush perhaps?

A near thing

Last summer Ironman went to Peru and brought me back some alpaca. In fact, he brought back lots of alpaca. 30 balls. Fingering weight. Two colors. It's gorgeous stuff, but since I wasn't sure what to do with it, I stuck it in the closet to marinate.


Indecieta Baby Alpaca

Recently I've come down with a major case of startitis. Whee - a shawl!...oooo, look over there, pretty fiber! Hmmm, I think I need a new sweater project... Some of this may have been encouraged by the lovely, but unseasonable weather that has been lingering in the Houston area, and the rest of it by the Website That Shall Not Be Named. But I found a lovely, retro pattern that was appealing, and decided maybe it would be a good fit for my lovely alpaca.

To recap:

Alpaca sweater.
Fingering weight.
Black.
In a Houston summer.

Does this seem like a good idea to anyone?

Thankfully, I swatched yesterday, and have been deterred from my path of madness. The yarn is gorgeously soft, knits up into a nice stockinette fabric, but the cables are pretty appalling. As in, they disappear into mush. This may change after a bath, but I'm not optimistic. So I think the alpaca will disappear back into the stash closet for a while longer, although I've got some ideas about other uses for it.

Marjorie swatch

Do you see a cable here? I don't see a cable here. Nope, nothing to see here.


The North Roe shawl is still a shapeless blob of bright green and brown, but it's getting larger. I'm well in to the second chart and am looking forward to the last.

North Roe in progress

Unfortunately, I've reached that stage in shawl knitting where the rows take forever (~3 rows/bus ride, not conducive to rapid progress), and it's starting to drag. This may also contribute to the startitis a bit - I'm not going to mention the other swatching action that is ongoing. Best not to confess to too much methinks!

The frog pond

Way back in October I came to a sad realization. The Basalt tank that I'd been working on for quite a while was just not quite right. So I banished it to the back of my closet and waited for spring to re-inspire me.

Basalt tank pre-frog



Basalt tank pre-frog


Yesterday I pulled it out only to realize that it was much worse then I had imagined. I remembered thinking it was a bit big and shapeless. In fact, it was 44 inches of big and shapeless, for what was supposed to be the 39" size. Oooops!* I alredy knew I was going to be frogging, but I had hoped to be able to keep some of the work and just redo the side hexagons with some waist shaping and call it good. Nope. No way, no how.

cotton top



cotton top

Cabled 50/50 cotton-wool goodness


Two episodes of Battlestar Galactica Season Three later I have a nice big pile of Cotton Top ready to become a new Basalt tank (the 36 inch size this time I think!).


* Further evidence that swatches lie.

Fiber Friday: Spiral boot socks

I realize that having a Fiber Friday post that includes a finished item is something of an oxymoron, but these are the second thing I've made for me with my own handspun, and I am excessively enamored of them.

Spiral boot socks

Pattern: Spiral Boot Socks by Veronik Avery, IK Summer 2007
Yarn: Toxic superwash corriedale, 3 ply, approximately fingering weight, dyed by Hello Yarn (more details on the spinning are here), 515 yds.
Needles: multiple sizes -- US 1/2.25 mm and US 2/2.75 mm dpns from Brittany, US 1.5/2.5 mm dpns from Knit Picks
Started/finished (this is why I love Ravelry!): 3/12 on my way to Portland/4/14/08.
Comments and modifications: Where to start? I spun this yarn hoping to end up with some subtle striping, and it worked out better then I ever imagined once the yarn was knitted up. I knew from the beginning I'd need to do a bunch of modifications since 1) I wanted to knit the socks toe-up so I could use all of the yarn and 2) the pattern schematics indicated a top leg opening of only 11 inches. Since I spent the better part of three days this winter trying to find a pair of knee high boots that would close around my "shapely" calves (18 inches!), 11 inches was not going to cut it.

Spiral boot socks toes


My gauge with this yarn on US 1/2.25 mm needles was about 7 sts/9 rows per inch so I did my standard toe increases up to the number of stitches called for in the pattern and tried it on. Everything looked good, so I forged ahead. I simply worked the charts as they are printed in the pattern for the length of the foot. When I had about 6.5 inches of foot done, I started increasing one stitch on each side of the heel stitches every other row for the gusset. Once those were done (14 increases total) I turned the heel as in the pattern directions and then worked the heel flap in sl1/k1 rib just as I did for the Firestarter socks.

Spiral boot socks heel


Once the heel was done, I started working the leg patttern with US 1/2.25 mm needles. I did 15 repeats before increasing one stitch before the YO. 15 more repeats and then increased one stitch after the YO. Note: this is not what was called for in the pattern, but I didn't read closely enough to catch the mistake until I was almost at the top of the leg. So I didn't bother fixing it. This increase in stitch number as you go up the leg creates subtle calf shaping that works pretty well.

Spiral boot sock cuff

I did 15 repeats of the final stitch pattern and then switched to US 2/2.75 needles for 12 more repeats. At that point, I figured I was going to use up most of the yarn, and started on the cuff. In order to tighten up the top of the sock and help keep them up, I switched to US 1.5/2.5 mm needles for the cuff pattern. Again, I didn't flip the chart at all, just worked it as written, did the final few rows of lace and used a standard bind off (k2, pass 1st stitch over second, k1, pass 1st stitch over second, repeat ad nauseum). This is not a particularly stretchy bind off, but it fits well, and hopefully will force the socks stay up.


Spiral boot socks

Now the next question is: will it ever be cold enough in Houston to wear them? Because knee high wool socks and shorts are not a fashion statement I'm particularly willing to make!

FO: Firestarter socks

april 021

Pattern: The Firestarter by Yarnissima
Yarn: Plymouth Happy Feet (Rav link), color 5, 2 skeins
Needles: Susan Bates US 1/2.25 mm
Comments/mods: These socks were the first project I started for PS, way back in the beginning of March. The first sock went along very quickly - I increased the number of stitches for the foot to 68 (up from 60 given that I have size 10 feet), and the number of foot repeats from 5 to 8. Once I turned the heel, I worked the heel flap in sl1/k1/purl back to give the standard ridge heel flap look. I also kept the front and the back of the leg in stockinette instead of the ribbing called for in the pattern. After a couple of pattern repeats, I increased 12 stitches (4 sts per round, 3 times) spaced out over a couple of repeats to give a bit of calf shaping.

When I got to the top of the leg, I decreased 8 sts evenly all the way around before working ten rounds of k1tbl/p1 ribbing. I decreased stitches in order to keep the twisted stitches from the side panels flowing smoothly into the ribbing. I really enjoyed this pattern, and I'm very glad I did this one before attempting something like Bayerische. Once I got the hang of working the twisted stitches, they moved along pretty quickly. I love the purl texture of the gusset next to the twisted stitches, and the pattern was very well written. They're nice and cozy, just in time for Houston summers!

april 015

The only slight downside to this project was the yarn. The colors are beautiful, but it was a bit splitty to work with. I've been thinking alot recently about spinning sock yarn, and how tightly spun/plied it needs to be to wear well. This stuff just seemed too softly spun to hold up well, but maybe I'll be pleasantly surprised!

In the interests of science (geek alert) I also kept track of how long it took me to knit one sock. Details are in a Flickr set if anyone is interested. Suffice to say I won't be making a living knitting socks for sale anytime soon!

Given my goal of knitting one pair of gift socks for every pair I knit for myself (the kid socks don't count), the next pair I cast on will have to be for someone else. There's enough options in my Rav queue to keep me busy for quite a while.